文华视讯
WenhuaVision
Outline
Wenhua remote GSM GPRS 3G 4G snapshot IP camera is based on GSM/GPRS/3G 4G network, and can take pictures on demands or on activation of external event signals.
The picture's resolution can be up to 5M(2560x1920). The Remote Camera also include a local storage SD card to avoid failure of the cellular network.
This system is equipped with multiple I/O expansion and can be easily interfaced to external equipment and can also be expanded with audio hardware to allow remote listening. It can connect various surveillance sensors such as door magnet sensor, PIR sensor,water level gauge sensor and so on.
The camera can be trigged to capture by the following ways:
Time lapse schedule time
Remote demand from user
Signal from one of the sensors
You can command the Remote Camera to contact you via the following ways.
FTP
EMail
SMS
Integrated PC software.
The system also integrate a set of PC software including central management system server(CMS) and user client. User can control the remote camera via the client software to do capture on demand.
One CMS can support up to three thousand front GSM/3G IP cameras and ten user console.
The whole system can support solar powered.
System Top Logic：
Main features:
1. There exists CMS for mass storage, which can manage up to three thousand front snapshot cameras and ten customer consoles to access on line at the same time
2. Support Max.up to 5.0 Megapixel (2560x1920) image resolution
3. Adopting dual image sensors and lens to get qualified pictures both in day and night; IR Led on only when snapshot to make it low power consumption
4. Built-in Web server for preview and configure via IE
5. Supporting Video clips recording functions, support Max up to 32G SD card for local storage.
6. Supporting LTE/WCDMA/GSM/GPRS/EDGE Mobile Network
7. Store and forward function.
When the 3G network is not well, camera will automatically switch to 2G network. When the 2G network temporary is not available, the pictures will be stored in the camera memory and then be forwarded to the CMS or to FTP server when the mobile network is available
8. Supporting several power supply modes:
A. Main power supply (DC12V±10%)
B. Solar panel powered and back up libattery powered are optional
9. Supporting multi communication ways (SMS, Email, FTP and smart and scalable integrated PC and mobile software).
10. Picture snapshot trigged by several ways:
A. On scheduled time
B. On command from user. User can command the camera to take pictures by PC client software
C. SMS. User can send SMS to the camera to take pictures
D. External Signal triggering. The camera can provide two external alarm signal interface (If for PIR, the camera can provide PIR voltage too)
E. Motion detection
Application:
1. Geology and forestry monitoring rockslides, floods, fires, wildlife and vandalism;
2. Transformer station surveillance;
3. Construction site monitoring working progress and valuable equipment;
4. Ferryboats,dredges and other marine acquiring the pictures you require from the vessel;
5. Oil and gas pipelines surveillance;
6. Power station surveillance;
7. GSM/CDMA BS Surveillance;
8. Home surveillance;
9. Traffic control and etc.
